From World Wind Wiki

Revision as of 15:59, 7 April 2005 by (Talk)
Jump to: navigation, search

Please check the websites and download the latest drivers before reporting a problem.

Last checked April 7th, 2005.



Nvidia drivers can be found at

  • nVidia GeForce 6800 Ultra: ok : make sure, under compatibility you turn visual themes off.
  • nVidia GeForce 6800LE: Seem to get bad graphical glitches when zooming. Visual themes off, latest official drivers.
  • nVidia GeForce FX 5500 Works Perfectly
  • nVidia GeForce 6800GT AGP: Ok
  • nVidia GeForce 6600GT AGP: Ok
  • nVidia GeForce FX 5700ve: Layer toggle buttons across top are red. Globe has weird silver fluctuations that, when you zoom in for a closer look, obscure all recognizable visual elements.
  • nVidia GeForce FX 5700LE 256mb : Ok
  • nVidia GeForce FX 5200: Gets the "Unable to locate a compatible graphics adapter." error. (with updated drivers and DirectX as of 03/29/2005)
  • nVidia GeForce 440 Go: Ok : need to set Direct3d in control panel to Best Image Quality -- Try downloading the managed directx as linked to in the Unofficial FAQ -- User:Llynix
  • nVidia GeForce 2 MX: Ok
  • nVidia GeForce 3: Ok
  • nVidia GeForce 4 MX: Ok
  • nVidia GeForce 256: Ok
  • nVidia asus TNT2: Ok
  • Riva TNT2 M64 32 Mb: Ok
  • Riva TNT2 M64/M64 Pro: problems tilting when zooming in/rotating
  • Riva TNT Vanta 16 Mb: Does not work
  • Quadro FX 3000 : ok
  • Quadro FX 600 PCI : ok
  • Quadro2 Pro : Ok
  • nVidia Geforce FX 5200 Running Ok
  • nVidia GeForce Ti4200 AGP8X : Ok



  • ATI RADEON x###  : ok
  • ATI RADEON 9###  : ok
  • ATI RADEON 9000 Pro  : ok
  • ATI RADEON 9100 IGP  : ok after drivers update (
  • ATI RADEON 9600 SE Family : ok (with Microsoft Corp. drivers March 23rd 2004.
  • ATI RADEON 9600 Pro  : ok (inc 9600xt)
  • ATI RADEON 9800 Pro  : ok
  • ATI RADEON 9800 SE  : ok
  • ATI RADEON 9800 XL (Medion) : ok
  • ATI RAdEON 9500 NP/PRO  : ok
  • ATI RAdEON 9550  : ok
  • ATI RADEON 8###  : ok
  • ATI RADEON 7###  : ok
  • ATI RADEON IGP 345  : ok
  • ATI RADEON Mobility 7###: ok
  • ATI RADEON Mobility 9000: ok
  • ATI RADEON Mobility 9200: ok
  • ATI RADEON Mobility 9600: ok
  • ATI RADEON Mobility 9700: ok
  • ATI RADEON Mobility 9800: ok
  • ATI Rage  : ok
  • ATI Rage Pro Turbo AGP 2x: fails ("an error has ocurred", then no graphics) with most recent Microsoft and ATI drivers
  • FireGL X1 128: ok
  • ATI MOBILITY FireGL T2  : ok
  • ATI RADEON VE DDR  : crash (especially when zooming in, but also at random times)
  • ATI Radeon FireGL 7800: works, but only with "quick resolution" feature disabled


Drivers are at:

Intel cards and onboard graphics chips often suffer from a problem which causes a planar sheet of triangular artifacts to appear on part of the screen when viewing from an angle (i.e. not looking directly down). Note that that's the only time the chip's 3D texture mapping functionality is used.

The problem gets worse the lower the viewing angle (the more you're looking toward the "horizon" instead of straight down), and it gets worse the closer you are to the 3D surface.

Either backing away (higher altitude from the earth surface) or looking more directly straight down will always fix the problem. Rotating the view (right-button drag horizontal) causes the corruption to change and sometimes go away.

Even at it's worst, there's always come combination of JUST the right altitude, tilt, and rotation near the one you want to get a good image. That's real good news for taking screen snapshots. But even if you find the "good spot", moving the mouse just a little will cause corruption again.

Turning off all layers but the one your viewing minimizes it.

The cards on this list that say 'ok' may also have this problem.

Screwing with "AGP aperature" in the BIOS doesn't help.

Side note: increasing AGP aperature imporves performance for ALL AGP cards! It causes system memory to be used as texture memory, but only when the card runs out of onboard memory, so you can leave it at 256K all the time.


  • Intel 82845G/GL/GE/PE/GV: This intel chip onboard my Intel motherboard with the latest Intel driver (v6.14.10.4020 1/23/05): screen goes blank during prog load and never comes back. The Feb '04 driver merely had the corruption described above. It's as bad as goddamn ATI drivers!
  • Intel Extreme Graphics 2 with Intel 82865G produces geometric artifacts with WW 1.3 when tilting, seemed to work better with ww 1.2
  • Intel 875: ok
  • Intel 865: Partial Support, problems tilting
  • Intel 82852/82855 GM/GME: Partial Support, problems tilting
  • Intel 82815 Graphics Controler: crash
  • Intel 82830M: Problems Tilting
  • Intel 850: ok
  • Intel 815: crash
  • Intel 810: Does not work
  • Intel 82852/82855: Partial support, problems tilting
  • Intel 82915G/GV/910GL Express Chipset family: Partial support, problems tilting


SIS drivers can be found at

  • SIS 6##: Works with updated drivers from SIS, problems tilting
  • SIS 7##: Works with updated drivers from SIS, problems tilting
  • Just an update for those running with the same chip set I am. (SIS 710): SiS does not seem to have a video driver newer than 2002 on their site. However, they have put a newer driver version dated April 2004 on Installing this newer driver did cure my problems running World Wind. -- Kenny (StarLost)
  • SIS Xabre: OK on Xabre 80 (with SiS Xabre Driver v3.10 and SiS Xabre Performance v3.57.53 Driver)
  • SIS M760 : OK ( with SIS UniVGA Driver 3.66 )


S3 drivers can be found at

  • S3 Virge: crash
  • S3 Prosavage: Partial support, problems tilting
  • S3 SuperSavage/IXC: Partial support, problems tilting
  • VIA/S3G UniChrome IGP Card: Support until zoom close...then crash. Can sombody fix that????
  • S3 Twister K integrated: Won't run



  • Matrox Parhelia: ok
  • Matrox Millenium P650: ok
  • Matrox G550: Partial Support, problems tilting, sometimes crashs in near view
  • Matrox G450 32MB: ok, sometimes crashes in near view
  • Matrox G400 16MB: ok, sometimes crashes in near view
  • Matrox G200: fuhgeddaboudit


  • XGI Volari: Doesn't appear to work
  • 3Dfx Voodoo : Not Compatible
  • PowerVR KYRO II: Partial support, problems tilting.
  • 3Dlabs wildcat vp760: Partial working, Using latest driver (w2k3010842.exe) on a win2000. Somelayer doesn't show (ex. Place name).
  • Elsa Gloria II: Ok

External links

Check out the Video hardware compatibility list in the forum.

Personal tools